Circulation Heaters
Circulation heaters are highly efficient heating cells designed to heat liquids and gases as they flow through a pipe body. These units are compact and easy to install. They offer primary heating or act as a backup/start-up heating source to natural or forced circulation heater systems.
The core of a circulation heater is a screw plug immersion heater or a flanged immersion heater that is installed into a pipe vessel. The vessel is thermally insulated and a stainless steel or rust-proof painted outside metallic jacket protects the insulating material. The vessel is connected to a system through inlet and outlet NPT threaded fittings or flange connections.
Specifications of Circulation Heater
The circulation heater design concept at Bucan incorporates all the rugged and durable features of a tubular heater with the flexibility of a heat exchanger.
Design specifications may require a unit to meet the boiler and pressure vessel code. Bucan can supply electric circulation heaters units that are designed, built, and registered to the ASME code, with the applicable code stamps.
Contact us to learn more about Bucan's industrial circulation heaters in Canada.
FAQs
Typical Heating Applications of Circulation Heater
- Hydraulic Oils
- Steam Super Heating
- Alkaline Cleaning Solutions
- Oils, Including Light to Heavy
- Water & Water Based Solutions
- De-mineralized or De-ionized Water
- Gasses (Air, Nitrogen, Natural Gas, Butane, Etc.)
Contact Us to buy electric circulation heaters & circulation heater water in Canada.
Standard Flanged Circulation Heaters
| Nominal vessel size | A | C | D | E | F | G | Inlet/outlet size (NPT) |
| 3" | Heated section of the heater | 5.5 | 7.5 |
A |
9.5 | 5.5 | 1" |
| 4" | 5.5 | 9.0 | 10.5 | 6.25 | 1 1/2" | ||
| 5" | 6.75 | 10.0 | 11 | 7 | 1 1/2" | ||
| 6" | 6.75 | 11.0 | 12 | 7 | 1 1/12" | ||
| 8" | 6.75 | 13.25 | 13.5 | 8.5 | 2" |
Standard Screw Plug Circulation Heaters
| Nominal vessel size | A | C | D | E | F | G | Inlet/outlet size (NPT) |
| 1" | Heated section of the heater | 1 1/12" | 3 3/4" |
A |
5" | 5" | 1" |
| 1 1/4" | 1 1/12" | 3 3/4" | 5" | 5" | 1" | ||
| 1 1/2" | 1 1/12" | 3 3/4" | 5" | 5" | 1 1/4" | ||
| 2" | 2 1/2" | 3 3/4" | 5 1/12" | 5 1/2" | 1 1/4" | ||
| 2 1/2" | 2 1/2" | 3 3/4" | 5 1/2" | 5 1/2" | 1 1/4" |
For design help call our technical staff and we can help guide you through the selection process of electric circulation heaters.
- Sheath materials - selected to suit the liquid or gas being heated
- Connections - NPT nipples or flanged inlet and outlet connections
- Flange pressure ratings - selected based on the temperature and pressure design conditions
- Terminal Enclosures
- General Purpose (NEMA 1)
- Weather Resistant (NEMA 4)
- Hazardous Location (NEMA 7)
- Passivation - when required
- Support frames - for stand-alone mounting
- Vessel materials - steel, stainless steel, or other specialty metals
- Cross flow baffles - to improve heat transfer characteristics, when required
- Controls - built in thermostats, thermocouples, and high limit thermocouples
Vertical Mounting with terminal housing facing upwards
(Recommended for liquids)
The inlet pipe should be at the bottom.
This configuration will maintain the heating element immersed in liquid at all times.
Horizontal Mounting
(For liquids or gases)
The inlet and outlet pipes should be installed at the top, oriented upwards, with the inlet pipe close to the terminal box. This configuration will maintain the heating element immersed at all times when liquids are heated and minimize the terminal housing temperature when gases are heated.
Vertical Mounting with terminal housing at the bottom
(Recommended for gases)
The inlet pipe should be at the bottom. This configuration will minimize the terminal housing temperature.
